Thanks for that info; since you have the power recline on your Thomas Payne recliner, the correct replacement heating pad is the following:
- Replacement 29-Volt Seat Heating Pad for Thomas Payne Seismic Series RV Couches and Chairs # 674864 view full answer...
You will have to go from the side or underneath. Then you can unplug and remove the old pad and replace it with the Replacement 29-Volt Seat Heating Pad for Thomas Payne Seismic Series RV Couches and Chairs # 674864.
If you need to replace the entire kit you can use the Replacement Seat Heater Kit for Thomas Payne RV Furniture # 195-000113 view full answer...
You can get a replacement heating element for your Thomas Payne sofa, with the right one depending on if your sofa has the power recline function or not.
- Without Power Recline Function: Replacement 12 Volt Seat Heating Pad for Thomas Payne RV Theatre Seating # LC38UD
- With Power Recline Function: Replacement 29-Volt Seat Heating Pad for Thomas Payne Seismic Series RV Couches and Chairs # 674864
These both include the wiring harness that you'd plug in to replace your current bad element. view full answer...
I apologize for your issues with your heating pads! The Replacement 12 Volt Seat Heating Pad for Thomas Payne RV Theatre Seating # LC38UD is the same pad as the 354491. The 354491 is the Lippert part number and the # LC38UD is the part number here at etrailer. This heating pad is the direct replacement for Lippert Thomas Payne theater seating only.
The only other option we carry as far as heating pads is the Replacement 29-Volt Seat Heating Pad for Thomas Payne Seismic Series RV Couches... view full answer...
While the lights might still work for the functions on the cupholder that actual switches in the cupholder may not. If you haven't already I would try swapping the cupholders to see if that makes a difference or not. If it's not the cupholder like the part # 195-387597 it's probably the power control box like the part # LC36FR which is for the Seismic line. You can try swapping those too to see if that allows the one side to work.
If it is the control box hopefully you do have a Seismic... view full answer...
The closet thing we have to what you are describing is the Universal Leg Kit for Thomas Payne RV Jackknife Sofas item # 195-000017. These are designed for RVs that don't have a pre-existing platform or frame but they would provide your tri-fold couch with extra support. They have a overall height of 11-1/2". view full answer...
The replacement part you need is the Replacement 12 Volt Heating Pad For Thomas Payne RV Theatre Seating, part # LC38UD.
I have included a product description link below. view full answer...
Installing the Thomas Payne Trifold RV Loveseat, # 195-000006 is very easy. This fits through RV doors that are
at least 26" wide. It converts into a bed in 3 easy steps to provide an additional sleeping surface in your RV. Once you've removed the back cushions, pull the bed out using the tab on the front of the loveseat. Then fold the legs out so that they support the bed. Finally, push the loveseat backrest down until flat. To turn the bed back into a couch, use the same steps but... view full answer...
Sounds like possibly a loose connection to the cupholder wiring connectors of your Thomas Payne couch or the cupholder wiring is bad and would need to be replaced. For a replacement we have the part # 195-387597 which in the product pictures you can see how it connects to the couch's wiring.
Also it could be a control box like the part # 195-387596 for if you have a Momentum. To test if it's a control box what you can do is swap the left side control box with the right side. If the problem... view full answer...
Yes, the Thomas Payne Trifold RV Loveseat # TP59FR will fit in a 68-1/4" opening. You will want to ensure your door has a 26" or larger opening to get the couch inside. view full answer...
It seems like all the RV doors are 24" and all the RV furniture is 26", but customers still manage to get all that furniture in without damaging it. If you have an extra person to help, you will be fine. view full answer...
The Thomas Payne Trifold RV Loveseat # TP59FR is currently the only sleeper sofa that we carry and it measures 68" long overall. The way they box the couch, it can fit through doors 26" wide while still in the box. We have had a few customers report back to us that it can fit thru a 24" wide door after you take it out of the box. Most of these style couches are made with limited entry space in mind. view full answer...
The Clamp-N-Carry Chair Rack for Standard RV Ladders part # CAM51430 should work great wit most gravity chairs, just be careful of your 100 lb weight capacity as they are typically heavier than most folding chairs. These holders are deigned to be installed on the exterior ladder and stay there so subjection to the elements won't be an issue.
It's covered under a 90 day manufactures warranty. view full answer...
The Thomas Payne Heritage Armless RV Recliner # 195-000107 can be used anywhere you'd like to use it, it requires minimal assembly and is made of low maintenance PloyHyde Vinyl. view full answer...
The Classic Accessories RV Captain Seat Cover # CA80112 is the universal seat cover that we carry. The dimensions for the # CA80112 is 24" wide, which is obviously smaller than the 25" inch chairs you have, so they won't be a fit.
One option you may have is Aries Automotive Seat Defender Bucket Seat and Headrest Protector # AA3142BR. While not specifically for Captains Chairs but they cover the seat and headrest. view full answer...
I reached out to my contact at Camco to get the weight capacity for their Chair Rack for RV Ladders, # CAM51490. They said they don't have a published rating, but this chair rack has been tested to 60 lbs. view full answer...
Looking into this it sounds like you have a loose connection to the cupholder wiring connectors on your Thomas Payne couch or the cupholder wiring is just bad and needs to be replaced.
The Replacement Cup Holder for Thomas Payne Momentum Recliners and Sofas - Qty 1 # 195-387597 will connect directly to the couch wiring. If that doesn't work it could be a bad control box. If you have The Momentum version The Replacement Control Box for Thomas Payne Momentum Recliners and Sofas - Qty 1... view full answer...
Yes, the Stromberg Carlson Lawn Chair Rack for RVs - 4 Chair # LA-104 will work with 7/8" diameter ladders!
This rack can accommodate up to a 1" thick ladders, and has rubberized brackets so it won't scratch the ladder.
Additionally, this rack has a maximum weight capacity of 50-lbs, can carry 2-4 chairs, and measures 24" long x 12" wide. view full answer...
The Classic Accessories RV Captain Seat Cover # CA80112 is a semi-custom seat cover so while I can't confirm if it will fit your application we did test fit it which you can see in the attached photo. If your captain chair looks similar to the on in the picture it should fit.
I reached out to my contact at Classic Accessories to see if they had test fit it on a captain chair found on a 2017 RV using the F-450 chassis and she said that they haven't. She said that it is a universal-type... view full answer...
Go To Results